Rohde & Schwarz FPL1000 Manuel D'utilisation page 601

®
R&S FPL1000
Failed to connect to server (code. 1006)
9.5.7 How to set up remote desktop
Remote Desktop is a Windows application which can be used to access and control
the instrument from a remote computer through a LAN connection. While the instru-
ment is in operation, the instrument screen contents are displayed on the remote com-
puter, and Remote Desktop provides access to all of the applications, files, and net-
work resources of the instrument. Thus, remote operation of the R&S FPL1000 is pos-
sible.
With Windows, Remote Desktop Client is part of the operating system. For other ver-
sions of Windows, Microsoft offers the Remote Desktop Client as an add-on. For
details refer to the Windows operating system documentation.
With the factory settings, the default "instrument" user can connect to the
R&S FPL1000 with the Remote Desktop program of the controller immediately. No fur-
ther configuration is required. However, if the connection fails or other users need to
connect, this section provides basic instructions on setting up the Remote Desktop for
the R&S FPL1000.
9.5.7.1 How to configure the R&S FPL1000 for remote operation via remote desktop
1. Create a fixed IP address for the TCP/IP protocol as described in
"How to assign the IP
Note: To avoid problems, use a fixed IP address.
When a DHCP server is used, a new IP address is assigned each time the instru-
ment is restarted. This address must first be determined on the instrument itself.
Thus, using a DHCP server is not suitable for remote operation of the
R&S FPL1000 via Remote Desktop.
2.
Select the "Windows" icon in the toolbar to access the operating system.
3. In the Windows "Start" menu, select "Settings > System".
4. Search for "remote access".
5. Select "Allow remote access to your computer".
6. Define which users are to be given access to the R&S FPL1000 via Remote Desk-
top.
Note: The user account under which configuration is carried out is automatically
enabled for Remote Desktop.
Manuel d'utilisation 1179.5860.09 - 12
Network operation and remote control
How to set up a network and remote control
address", on page 583.
Chapter 9.5.1.2,
601 601