Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
●
Asynchronous commands
A command which does not automatically finish executing before the next com-
mand starts executing (overlapping command) is indicated as an Asynchronous
command.
●
Reset values (*RST)
Default parameter values that are used directly after resetting the instrument (*RST
command) are indicated as *RST values, if available.
●
Default unit
The default unit is used for numeric values if no other unit is provided with the
parameter.
●
Manual operation
If the result of a remote command can also be achieved in manual operation, a link
to the description is inserted.
10.2 Common suffixes
In the Spectrum application, the following common suffixes are used in remote com-
mands:
Table 10-1: Common suffixes used in remote commands in the Spectrum application
Suffix
<m>
<n>
<t>
<li>
10.3 Common commands
Common commands are described in the IEEE 488.2 (IEC 625-2) standard. These
commands have the same effect and are employed in the same way on different devi-
ces. The headers of these commands consist of "*" followed by three letters. Many
common commands are related to the Status Reporting System.
Available common commands:
*CAL?
*CLS
*ESE
*ESR?
*IDN?
*IST?
*OPC
*OPT?
*PCB
Manuel d'utilisation 1179.5860.09 - 12
Value range
1 to 16
1 to 16
1 to 6
1 to 8
....................................................................................................................................... 605
......................................................................................................................................... 605
......................................................................................................................................... 605
...................................................................................................................................... 605
........................................................................................................................................ 606
........................................................................................................................................ 606
........................................................................................................................................ 606
...................................................................................................................................... 606
........................................................................................................................................ 607
Description
Marker
Window (in the currently selected channel setup)
Trace
Limit line
Remote commands
Common commands
610
610
Publicité
