Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
LAYout:WINDow<n>:TYPE <WindowType>
Queries or defines the window type of the window specified by the index <n>. The win-
dow type determines which results are displayed. For a list of possible window types
LAYout:ADD[:WINDow]?
see
Note this command is not available in all applications and measurements.
Suffix:
<n>
Parameters:
<WindowType>
Example:
10.7.2
Examples: configuring the result display
The following example demonstrates how to configure result displays in a remote envi-
ronment.
10.7.2.1
Example 1: adding and arranging windows
Starting from the default initial display in the Spectrum application (Frequency Sweep),
we will configure the following result displays:
1 Frequency Sweep
2 Spectrogram
//--------------Resetting the instrument -----------
*RST
//--------------- Adding new windows --------------------
Manuel d'utilisation 1179.5860.09 - 12
on page 743.
1..n
Window
LAY:WIND2:TYPE?
3 "Marker Table"
4 "Marker Peak List"
Remote commands
Remote commands for result displays
756
756
Publicité
