Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
When the display update during remote control is off, this command has no immediate
effect.
Suffix:
<n>
<w>
<t>
Parameters:
<Mode>
Example:
Manual operation:
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:Y[:SCALe]:RPOSition
This command defines the vertical position of the reference level on the display grid
(for all traces).
The R&S FPL1000 adjusts the scaling of the y-axis accordingly.
For measurements with the optional tracking generator, the command defines the posi-
tion of the reference line.
Suffix:
<n>
<w>
<t>
Parameters:
<Position>
Example:
Manual operation:
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:Y:SPACing <ScalingType>
This command selects the scaling of the y-axis (for all traces, <t> is irrelevant).
Manuel d'utilisation 1179.5860.09 - 12
Window
subwindow
irrelevant
ABSolute
absolute scaling of the y-axis
RELative
relative scaling of the y-axis
*RST:
DISP:TRAC:Y:MODE REL
See
"Scaling"
<Position>
Window
subwindow
Not supported by all applications
irrelevant
0 PCT corresponds to the lower display border, 100 percent cor-
responds to the upper display border.
*RST:
Default unit: PCT
DISP:TRAC:Y:RPOS 50PCT
See
"Reference Position"
See
"Ref Level Position"
Setting basic spectrum RF measurement parameters
ABSolute
on page 323
frequency display: 90 PCT; time display: 50 PCT;
AF spectrum display (K7): 100 PCT;
on page 302
on page 323
Remote commands
782
782
Publicité
