Rohde & Schwarz FPL1000 Manuel D'utilisation page 930

®
R&S FPL1000
<Password>
<State>
MMEMory:NETWork:UNUSeddrives
This command returns a list of unused network drives.
MMEMory:NETWork:USEDdrives [<State>]
This command returns a list of all network drives in use.
Parameters:
<State>
MMEMory:RDIRectory <arg0>
This command deletes the indicated directory.
Parameters:
<arg0>
10.9.2 Selecting the items to store
The following commands select the items to be included in the configuration file.
Depending on the used command, either the items from the entire instrument
(MMEMory:SELect[:ITEM]...), or only those from the currently selected channel
setup (MMEM:SELect:CHANnel[:ITEM]...) are stored.
MMEMory:SELect:CHANnel[:ITEM]:ALL
MMEMory:SELect[:ITEM]:ALL
MMEMory:SELect:CHANnel[:ITEM]:DEFault
MMEMory:SELect[:ITEM]:DEFault
MMEMory:SELect:CHANnel[:ITEM]:HWSettings
Manuel d'utilisation 1179.5860.09 - 12
String containing the password corresponding to the <User-
Name>.
The password is optional.
ON | OFF | 1 | 0
ON | 1
Reconnects at logon with the same user name.
OFF | 0
Does not reconnect at logon.
You do not have to use the parameter. If you do not include the
parameter, the command returns a list of all drives in use.
This is the same behavior as if you were using the parameter
OFF.
ON | 1
Returns a list of all drives in use including the folder information.
OFF | 0
Returns a list of all drives in use.
String containing the path of the directory to delete.
Note that the directory you want to remove must be empty.
.................................................................................. 925
................................................................................................. 925
........................................................................... 925
........................................................................................... 925
..................................................................... 925
Remote commands
Managing settings and results
930 930