Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Example:
Manual operation:
CALCulate<n>:DELTamarker<m>[:STATe] <State>
This command turns delta markers on and off.
If necessary, the command activates the delta marker first.
No suffix at DELTamarker turns on delta marker 1.
Suffix:
<n>
<m>
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:DELTamarker<m>:TRACe <Trace>
This command selects the trace a delta marker is positioned on.
Note that the corresponding trace must have a trace mode other than "Blank".
If necessary, the command activates the marker first.
Suffix:
<n>
<m>
Parameters:
<Trace>
Example:
CALCulate<n>:DELTamarker<m>:X <Position>
This command moves a delta marker to a particular coordinate on the x-axis.
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
CALC:DELT3:MREF 2
Specifies that the values of delta marker 3 are relative to marker
2.
See
"Reference Marker"
Window
Marker
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
CALC:DELT2 ON
Turns on delta marker 2.
See
"Marker State"
on page 269
See
"Marker Type"
on page 269
See
"Select Marker"
on page 271
Window
Marker
Trace number the marker is assigned to.
CALC:DELT2:TRAC 2
Positions delta marker 2 on trace 2.
Remote commands
on page 270
847
847
Publicité
