Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
*SRE <Contents>
Service request enable
Sets the service request enable register to the indicated value. This command deter-
mines under which conditions a service request is triggered.
Parameters:
<Contents>
*STB?
Status byte query
Reads the contents of the status byte in decimal form.
Usage:
*TRG
Trigger
Triggers all actions waiting for a trigger event. In particular, *TRG generates a manual
trigger signal. This common command complements the commands of the TRIGger
subsystem.
*TRG corresponds to the INITiate:IMMediate command (see
IMMediate]
Usage:
*TST?
Self-test query
Initiates self-tests of the instrument and returns an error code.
Note: If you start a self-test remotely, then select the "Local" softkey while the test is
still running, the instrument only returns to the manual operation state after the test is
completed. In this case, the self-test cannot be aborted.
Return values:
<ErrorCode>
Usage:
Manuel d'utilisation 1179.5860.09 - 12
Contents of the service request enable register in decimal form.
Bit 6 (MSS mask bit) is always 0.
Range:
0 to 255
Query only
on page 620).
Event
integer > 0 (in decimal format)
An error occurred.
0
No errors occurred.
Query only
Remote commands
Common commands
INITiate<n>[:
614
614
Publicité
