Rohde & Schwarz FPL1000 Manuel D'utilisation page 938

®
R&S FPL1000
MMEMory:STORe<1|2>:TYPE <Type>
This command defines whether the data from the entire instrument or only from the
current channel setup is stored with the subsequent MMEM:STOR... command.
Suffix:
<1|2>
Parameters:
<Type>
Example:
SYSTem:PRESet
This command presets the R&S FPL1000. It is identical to *RST.
Example:
Usage:
SYSTem:PRESet:CHANnel[:EXEC]
This command restores the default instrument settings in the current channel setup.
Use INST:SEL to select the channel setup.
For details see
on page 468.
Example:
Usage:
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
irrelevant
INSTrument | CHANnel
INSTrument
Stores data from the entire instrument.
CHANnel
Stores data from an individual channel setup.
*RST: INST
INST:SEL 'SPECTRUM2'
Selects channel setup'SPECTRUM2'.
MMEM:STOR:TYPE CHAN
Specifies that channel setup data is to be stored.
SYST:PRES
Event
Chapter 7.1, "Restoring the default instrument configuration
INST:SEL 'Spectrum2'
Selects the channel setup for "Spectrum2".
SYST:PRES:CHAN:EXEC
Restores the factory default settings to the "Spectrum2" channel
setup.
Event
See "Preset Channel setup"
Remote commands
Managing settings and results
on page 101
(preset)",
938 938