Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
[SENSe:]ESPectrum<sb>:PRESet:STORe <Standard>
This command saves the current SEM measurement configuration.
Standard definitions are stored in an xml file. The default directory for SEM standards
is C:\Users\Public\Documents\Rohde-Schwarz\Analyzer\sem_std.
Suffix:
<sb>
Parameters:
<Standard>
Manual operation:
10.6.7.2
Controlling the measurement
The following commands control the measurement itself.
INITiate<n>:ESPectrum
[SENSe:]SWEep:MODE
INITiate<n>:ESPectrum
This command initiates a Spectrum Emission Mask measurement.
Suffix:
<n>
[SENSe:]SWEep:MODE <Mode>
This command selects the spurious emission and spectrum emission mask measure-
ments.
You can select other measurements with
●
CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>[:STATe]
Parameters:
<Mode>
Example:
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
1 to 3
Sub block in a Multi-SEM measurement
String containing the file name.
You can save the file in a subdirectory of the directory men-
tioned above. In that case, you have to include the relative path
to the file.
See
"Save Standard"
on page 191
........................................................................................................... 653
........................................................................................................... 653
irrelevant
LIST | AUTO | ESPectrum
AUTO
Turns on basic spectrum measurements.
ESPectrum
Turns on spectrum emission mask measurements.
LIST
Turns on spurious emission measurements.
*RST:
AUTO
SWE:MODE ESP
Remote commands
659
659
Publicité
