Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
CALCulate<n>:STATistics:SCALe:X:RLEVel <RefLevel>
This command sets the reference level for statistical measurements. The effects are
identical to
RLEVel.
Note that in case of statistical measurements the reference level applies to the x-axis.
Suffix:
<n>
Parameters:
<RefLevel>
Example:
Manual operation:
CALCulate<n>:STATistics:SCALe:Y:LOWer <Magnitude>
This command defines the lower vertical limit of the diagram.
Suffix:
<n>
Parameters:
<Magnitude>
Example:
Manual operation:
CALCulate<n>:STATistics:SCALe:Y:UNIT <Unit>
This command selects the unit of the y-axis.
Suffix:
<n>
Parameters:
<Unit>
Example:
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:Y[:SCALe]:
Window
The unit is variable.
If a reference level offset is included, the range is adjusted by
that offset.
Range:
*RST:
Default unit: dBm
CALC:STAT:SCAL:X:RLEV -60dBm
See
"Ref Level"
Window
The number is a statistical value and therefore dimensionless.
Range:
*RST:
CALC:STAT:SCAL:Y:LOW 0.001
See
"Y-Max/ Y-Min"
Window
PCT | ABS
*RST:
CALC:STAT:SCAL:Y:UNIT PCT
Sets the percentage scale.
See
"Y-Unit"
Configuring and performing measurements
-130 dBm to 30 dBm
0 dBm
on page 227
1E-9 to 0.1
1E-6
on page 227
ABS
on page 227
Remote commands
706
706
Publicité
