Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Manual operation:
HCOPy:TREPort:ITEM:LOGO:CONTrol <Repetition>
This command selects how often the logo is displayed in the document.
Parameters:
<Repetition>
Example:
Manual operation:
HCOPy:TREPort:ITEM:SELect [<ChannelType>],'<Item>,<Item>,<Item>,...'
This command defines the type of information that a test report is made up out of.
Parameters:
<ChannelType>
<Item>
Example:
Example:
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
See
"Logo"
on page 506
GLOBal
The selected header line is displayed at the top of every page of
the report.
NEVer
The selected header line is displayed on no page of the report.
Note that a line that does not contain anything is still displayed in
the report as a blank line. If you select NEVer, the line is not dis-
played at all.
*RST:
NEVer
HCOP:TREP:ITEM:LOGO 'c:\logo.png'
Selects a picture to be displayed in the report document.
HCOP:TREP:ITEM:LOGO:CONT GLOB
Displays the logo on each page.
See
"Visibility"
on page 505
Optional parameter to define the channel type that the selection
applies to.
When you omit the <ChannelType> parameter, the selection
applies to the currently active channel.
String containing the information you want to include in the test
report.
Note that the items, separated by commas, have to be written
into one string (see example below).
The available items depend on the application you are using.
See the tables below for a short description of each item.
Per default, some items are selected (see tables below).
HCOP:TREP:ITEM:SEL 'SETT,MARK,SRES,DIAG'
The selection is applied to the currently selected channel.
HCOP:TREP:ITEM:SEL SAN,'SETT,LISN'
A dataset in the Spectrum application consists of the general
instrument and measurement settings and the LISN settings.
See
"Select All / Select None"
Remote commands
Managing settings and results
on page 507
956
956
Publicité
