Télécharger Imprimer la page

Rohde & Schwarz FPL1000 Manuel D'utilisation page 764

Masquer les pouces Voir aussi pour FPL1000:

Publicité

Les langues disponibles

Les langues disponibles

®
R&S
FPL1000
[SENSe:]FREQuency:SPAN:FULL
This command restores the full span.
Manual operation:
[SENSe:]FREQuency:STARt <Frequency>
This command defines a start frequency for measurements in the frequency domain.
Parameters:
<Frequency>
Example:
Manual operation:
[SENSe:]FREQuency:STOP <Frequency>
This command defines a stop frequency for measurements in the frequency domain.
Parameters:
<Frequency>
Example:
Manual operation:
10.8.1.2
Adjusting settings automatically
The commands required to adjust settings automatically in a remote environment are
described here.
[SENSe:]ADJust:ALL
[SENSe:]ADJust:CONFigure:LEVel:DURation
[SENSe:]ADJust:CONFigure:LEVel:DURation:MODE
[SENSe:]ADJust:CONFigure:HYSTeresis:LOWer
[SENSe:]ADJust:CONFigure:HYSTeresis:UPPer
[SENSe:]ADJust:CONFigure:TRIGger
[SENSe:]ADJust:FREQuency
[SENSe:]ADJust:LEVel
[SENSe:]ADJust:ALL
This command initiates a measurement to determine and set the ideal settings for the
current task automatically (only once for the current measurement).
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
See
"Full Span"
on page 312
0 to (fmax - min span)
*RST:
0
Default unit: HZ
FREQ:STAR 20MHz
See
"Frequency Sweep"
See
"Start / Stop"
on page 312
min span to fmax
*RST:
fmax
Default unit: HZ
FREQ:STOP 2000 MHz
See
"Frequency Sweep"
See
"Start / Stop"
on page 312
............................................................................................................... 758
......................................................................... 759
..................................................................................... 760
.................................................................................................. 761
............................................................................................................ 761
Remote commands
on page 103
on page 103
............................................................. 759
................................................................... 760
.................................................................... 760
764
764

Publicité

loading