Rohde & Schwarz FPL1000 Manuel D'utilisation page 650

®
R&S FPL1000
<UpperChan>
Example:
Usage:
CALCulate<n>:LIMit<li>:ACPower:ALTernate<ch>[:RELative]:STATe <State>[,
This command turns the relative limit check for the alternate channels on and off.
You have to activate the general ACLR limit check before using this command with
CALCulate<n>:LIMit<li>:ACPower[:STATe].
Suffix:
<n>
<li>
<ch>
Parameters:
<State>
<State>
Manual operation:
CALCulate<n>:LIMit<li>:ACPower[:STATe] <State>
This command turns the limit check for ACLR measurements on and off.
Suffix:
<n>
<li>
Manuel d'utilisation 1179.5860.09 - 12
FAIL
Limit check has failed.
text value
The state of the limit check for the upper alternate or adjacent
channels.
PASSED
Limit check has passed.
FAIL
Limit check has failed.
INIT:IMM;*WAI;
CALC:LIM:ACP:ACH:RES?
PASSED,PASSED
Query only
<State>]
irrelevant
irrelevant
1..n
Alternate channel number
ON | OFF | 1 | 0
Relative limit check for lower alternate channel
*RST:
ON | OFF | 1 | 0
Relative limit check for upper alternate channel
*RST:
See "Limit Check"
irrelevant
irrelevant
Configuring and performing measurements
0
0
on page 146
Remote commands
650 650