Rohde & Schwarz FPL1000 Manuel D'utilisation page 862

®
R&S FPL1000
Manual operation:
CALCulate<n>:DELTamarker<m>:MINimum:NEXT
This command moves a marker to the next minimum peak value.
In the spectrogram, the command moves a marker horizontally to the minimum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
<m>
Manual operation:
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK]
This command moves a delta marker to the minimum level.
In the spectrogram, the command moves a marker horizontally to the minimum level in
the currently selected frame. The vertical marker position remains the same.
If the marker is not yet active, the command first activates the marker.
Suffix:
<n>
<m>
Manual operation:
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt
This command moves a delta marker to the next minimum peak value.
The search includes only measurement values to the right of the current marker posi-
tion.
In the spectrogram, the command moves a marker horizontally to the minimum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
<m>
Manual operation:
10.8.8.5 Retrieving marker results
The following commands are used to retrieve the results of markers.
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
See "Search Next Minimum"
Window
Marker
See "Search Next Minimum"
Window
Marker
See "Search Minimum"
Window
Marker
See "Search Next Minimum"
Remote commands
on page 370
on page 370
on page 370
on page 370
862 862