Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Useful commands for marker demodulation described elsewhere:
●
SYSTem:SPEaker[:STATe]
●
SYSTem:SPEaker:VOLume
Remote commands exclusive to marker demodulation:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:CONTinuous
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:HOLDoff
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:SELect
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation[:STATe]
[SENSe:]DEMod:SQUelch:LEVel
[SENSe:]DEMod:SQUelch[:STATe]
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:CONTinuous <State>
This command turns continuous demodulation of the signal at the marker position in
the frequency domain on and off.
In the time domain continuous demodulation is always on.
Suffix:
<n>
<m>
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:HOLDoff <Duration>
This command defines for how long the the signal at the marker position is demodula-
ted.
In the time domain continuous demodulation is always on.
Suffix:
<n>
<m>
Parameters:
<Duration>
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
on page 807
on page 807
............................................................................................. 889
......................................................................................... 889
Window
Marker
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
CALC2:MARK3:FUNC:DEM:CONT ON
Switches on the continuous demodulation.
See
"Continuous Demodulation"
Window
Marker
Range:
10 ms to 1000 s
*RST:
Marker demodulation = OFF
Default unit: S
Remote commands
...................................... 887
............................................. 887
............................................... 888
.............................................. 888
on page 387
893
893
Publicité
