Rohde & Schwarz FPL1000 Manuel D'utilisation page 578

®
Network operation and remote control
R&S FPL1000
Network and remote control settings
Risk of network problems
All parameters can be edited here; however, beware that changing the computer name
has major effects in a network.
For details, see Chapter 9.5, "How to set up a network and remote control",
on page 582.
Computer Name .................................................................................................................... 572
IP Address .............................................................................................................................. 573
Subnet Mask .......................................................................................................................... 573
DHCP ...................................................................................................................................... 573
Network Configuration .......................................................................................................... 573
Computer Name
Each instrument is delivered with an assigned computer name, but this name can be
changed. The naming conventions of Windows apply. If too many characters and/or
numbers are entered, an error message is displayed in the status line.
The default instrument name is a non-case-sensitive string with the following syntax:
<Type><variant>-<serial_number>
For example FPL1003-123456
The serial number can be found on the rear panel of the instrument. It is the third part
of the device ID printed on the bar code sticker:
Manuel d'utilisation 1179.5860.09 - 12 578 578