Breville the Custom Loaf BBM800XL Manuel D'instructions page 39

Cleaning the Bread Pan
1. Half fill the bread pan with warm soapy water. A non-abrasive liquid
cleanser or mild spray solution may be used. Allow to stand for 10 - 20
minutes.
NOTE
Do not immerse the outside of the bread pan in water as this may interfere
with the free movement of the coupling and drive shaft. Wash only the interior
of the bread pan.
2. Remove the paddle and wash the inside of the bread pan with
a soft cloth. Do not use an abrasive cleanser or metal scouring pad as
these will scratch the non-stick coating. Ensure there is no baked-on
residue or dough on the drive shaft. Rinse thoroughly.
3. Let all surfaces dry thoroughly prior to inserting into the stainless steel
housing.
NOTE
• Some discolouration may appear on and inside the bread pan over time.
This is a natural effect caused by moisture and steam and will not affect the
bread in any way.
• The inside of the bread pan is coated with a high quality non-stick coating.
As with any non-stick coated surface, do not use abrasive cleansers, metal
scouring pads or metal utensils to clean these items as they may damage
the finish.
• Never wash the bread pan in the dishwasher.
Cleaning the Paddle
1. Wash the collapsible paddle and fixed paddle with warm soapy water and
a soft cloth.
2. Ensure there is no baked-on residue in any of the paddle crevices,
including the 'D' shaped hole and hinge area. If there is, soak the paddle
in warm soapy water. A non-abrasive liquid cleanser or mild spray solution
may be used. Allow to stand for 10 - 20 minutes.
Use a wooden toothpick, thin wooden skewer or plastic cleaning brush
to remove any bread residue from the crevices and hinge area. Failure to
clean the hinge area may eventually result in the collapsible paddle not
working effectively. Rinse thoroughly.
3. Let all surfaces dry thoroughly prior to inserting into the bread pan.
NOTE
We do not recommend washing the paddles in the dishwasher.
To extend the life of the non-stick coating, always wash in warm soapy water.
Do not use abrasive cleansers, metal scouring pads or metal utensils to clean
the paddles as these items may damage the paddle surface.
Storage
1. Ensure the bread maker is turned OFF by pressing and holding the
CANCEL button. The bread maker is OFF when the START | PAUSE
button surround is no longer red. Remove the power plug from the power
outlet.
2. Ensure the bread maker and all accessories are completely cool, clean
and dry.
3. Place the bread pan and paddles into the interior baking chamber.
4. Ensure the lid is closed.
5. Store the appliance in an upright position standing level on its support
legs. Do not store anything on top.
EN
39