Breville the Custom Loaf BBM800XL Manuel D'instructions page 13

a. Ensure the bread pan is in the baking chamber.
b. Lift open the lid of the main stainless-steel housing. The base
of the Automatic Fruit and Nut Dispenser can be identified
by the row of steam vents. Push in the base until it clicks into
place. Close the main stainless-steel housing lid.
c. Lift open the lid of the Automatic Fruit and Nut Dispenser then
add a maximum ¾ cup of dry ingredients. Always remember:
• Ingredients should be suitably sized, so they do not fall through the
steam vents at the base of the dispenser. We recommend separating
ingredients that may stick together, such as raisins and other fruits,
before adding.
• Liquids should not be added to the dispenser.
• Glacé (glazed) fruits such as cherries, ginger, pineapple; and bottled or
canned ingredients such as olives and sun-dried tomatoes etc. should
be washed and thoroughly dried on kitchen paper towel before adding
into the dispenser.
• It is recommended that the dispenser be cleaned thoroughly with a
soft, damp cloth after each use.
d. The Fruit and Nut Dispenser will automatically release its
contents on the BASIC, BASIC RAPID, WHOLE WHEAT,
WHOLE WHEAT RAPID, GLUTEN FREE, CRUSTY LOAF,
SWEET, YEAST FREE and all DOUGH settings. You may
notice the base of the dispenser flip open during the bread
making cycle even when it is empty. This is normal. It is the
dispenser automatically releasing ingredients 8 minutes before
the end of the 'knead 2' phase, regardless of whether it has
been loaded.
TIP
If ingredients exceed the maximum ¾ capacity of the dispenser, lift open the
lid and add ingredients manually when the 'add-in' alert sounds 8 minutes
before the end of the 'knead 2' phase. Ensure the BEEPER button has not
been muted and the sound alerts are on - there should be no [sound mute
icon] symbol on the LCD screen. Do not press and hold the CANCEL button
to add ingredients as this will cancel the entire cycle.
6. Plug in the Power Cord
a. Unwind the power cord completely and insert the power plug
into a grounded power outlet.
b. An alert will sound, and the LCD screen will illuminate.
The function options will appear with an indicator on the preset
BASIC setting.
7. Select the Setting
a. Turn the SELECT push-dial until the indicator on the LCD
screen reaches the desired setting. Press the push-dial to
select.
b. If you accidentally press the wrong setting, press the CANCEL
button to return to the main menu and make your selection
again.
EN
13