Publicité
Cycle Programming Control
1� Press and hold the Channel button to enter Advanced Channel Controls for that channel�
2� Press the Cycles button (Advanced Channel Controls) to enter Advanced Cycle Controls to program freeze-thaw
cycle(s) (Screen 42)�
Screen 42. Advanced Cycle Controls
3� Select the desired freeze intensity from the Freeze controls using the drop-down menu and the freeze phase
duration using the appropriate arrow or the scroll bar�
4� Add the programmed freeze cycle to the Cycle Sequence menu using the left Arrow button next to the Freeze
controls�
5� Select the desired thaw by clicking on the available options in the Thaw controls� Select the thaw duration using
the appropriate arrows or the scroll bar�
6� Add the programmed thaw cycle to the Cycle Sequence menu using the left Arrow button next to the Thaw controls�
7� Program additional cycles by repeating steps 3 – 6 as appropriate�
8� Arrange the cycle sequence by highlighting a programmed cycle on the Cycle Sequence controls� Using the Up
or Down button, move the cycle into the desired sequence�
9� Remove a cycle from the Cycle Sequence by highlighting the cycle then pressing the Stop button�
10� Press the Go button to initiate the cryoablation procedure with the programmed cycles�
63
Black (K) ∆E ≤5.0
Publicité
