Temperature Sensors
The Temperature Sensors Section (Screen 24) displays the temperature measured for each sensor location on the
connected MTS needles and a black triangle highlights the coldest temperature on each MTS�
Temperature vs� Time can be plotted for any four selected sensor locations from the connected MTS needles� Press the
button corresponding to the selected sensor location on an MTS to select that sensor location to be graphed� Press
the respective MTS Channel button to graphically display all four sensor locations of an individual MTS� The color of
the selected temperature sensor location corresponds to the color of the temperature line on the graph� Press the
Thermometer button to graph the coldest temperature on a selected MTS� Press the Thermometer button again to
return to the original display�
NOTE: A maximum of four sensor locations can be displayed on the graph at any one time� The four selected sensor
locations can be from any of the connected MTS needles�
Screen 24. Temperature Sensors Section
1 MTS sensor locations
2 MTS Channel button
Select the Scale button to adjust the graphical display of the temperature measurements such that the temperature
throughout the entire procedure is visible� Select the Scroll button to display a scroll bar to scroll through the graphical
data during the procedure�
To enlarge the Temperature Sensors graphical display, press the Maximize button (+)� Press the Minimize button (-)
to return the display to the original size�
Advanced Temperature Sensors Controls: Pressing and holding an MTS Channel button provides an option to set
visual alarms when a chosen temperature measurement falls below a desired value or when the rate of temperature
drop is greater than a desired value� This advanced control also provides an option to label the MTS location (reference
the Advanced Temperature Sensor Controls Section)�
3 Thermometer button
4 Maximize button
5 Button corresponding to 5 mm sensor location
6 Triangle indicates coldest sensor
45
Black (K) ∆E ≤5.0