Publicité
Enlarge and Reposition Timers
During a needle test, freeze, thaw, or idle phase, press the Timer button to enlarge the timer display (Screen 22)� The
enlarged Timer displays the channel number in the upper left corner of the timer window, elapsed time, and, when freezing,
the selected freeze intensity� When CX-type needles are connected, the enlarged timer also displays the internal needle
tip temperature during the freeze phase and the estimated temperature range of the needle shaft during the thaw phase�
NOTE: During the needle warming phase for CX-type needles, the timer will display a rotating warming indicator�
Timers for three selected channels can be simultaneously enlarged� Press the timer to return it to its original size�
Screen 22. Enlarged Timer
Change the location of an enlarged timer by dragging the timer to a new screen location�
Screen 23. Repositioned Enlarged Timers
To briefly display the time associated with a completed cycle, press the section of the status bar for the selected operation�
Press the Scale button to adjust the graphical display of the channel status such that all operations are visible� Press
the Scroll button to adjust the graphical display to 5-minute increments; the display scrolls throughout the procedure�
Press the Maximize button (+) to enlarge the graphical display� Press the Minimize button (-) to reduce the display
to the original size
44
Black (K) ∆E ≤5.0
Publicité
