Honda BF40D Mode D'emploi page 790

7) Connect the water tube A and the water tube C to the vapor
separator.
Note to connect the water tube A and the water tube C to
the vapor separator aligning the " " mark on each tube with
the corresponding projection on the vapor separator.
Install the tube clip B10 with the tab in the direction shown.
Install the following parts.
- Intake manifold assembly (P. 5-96)
- Engine cover (P. 4-2)
5-111
[2]
[1]
" "MARK
WATER TUBE C
[5]
[4]
WATER
TUBE CLIP B10 (2)
TUBE A
790
[3]
PROJECTIONS