Honda BF40D Mode D'emploi page 378

6) Put the outboard motor in the "R" (Reverse) gear and then
shift to "N" (Neutral) gear slowly.
1
7) Holding the gear in the position described in step 5, mark
the inner cable with (B) at the outer cable seal end.
2
3
4
5
6
8) Mark the inner cable with mark (C) at the midpoint between
the mark (A) and mark (B).
7
8
9
10
11
12
9) Align the mark (C) made in step 7 with the end of the outer
13
cable seal.
14
15
16
17
18
19
10) Check that the shift link B is in the neutral position.
20
11) Move the shift link B lightly right or left and check for free
play.
If there is a play, set the shift link B in the center of the play.
3-22
[1]
"R" (REVERSE)
[3]
MARK (B)
[1]
MARK (B)
[3]
[2]
MARK (A)
MARK (C)
[1]
MARK (C)
[1] <NEUTRAL POSITION>
378
[2]
"N" (NEUTRAL)
[2]
SHIFT LINK B