Function Test Without Using Hds (Dr. H Or Pocket Tester) - Honda BF40D Mode D'emploi

• FUNCTION TEST WITHOUT USING HDS (Dr. H OR POCKET TESTER)

Turn the combination switch OFF and
disconnect the ECM connector A
Short the No.3 connector (Yellow/Green) of
the ECM connector A
9
harness side 36P connector to the engine
ground using a jumper wire.
Turn the combination switch ON.
ECM CONNECTOR A
MAIN WIRE HARNESS SIDE
9
BUZZ (Yellow/Green)
VIEWED FROM THE TERMINAL SIDE
Does the warning buzzer sound?
YES
Turn the combination switch OFF.
Short the No.1 terminal (White/Blue) of the
ECM connector A 9 main wire harness
side 36P connector to the engine ground
using a jumper wire.
Turn the combination switch ON.
ECM CONNECTOR A
MAIN WIRE HARNESS SIDE
9
ACGLP (White/Blue)
VIEWED FROM THE TERMINAL SIDE
Does the alternator indicator light come
ON?
YES
Go to P. 2-38
2-37
.
9
NO
main wire
NO
74
Check the following:
• Warning buzzer (P. 15-8, 16-35)
• Combination switch (P. 15-8, 16-35)
• Main wire harness
• Handle cable or remote control cable A
and B
Check the following:
• Indicator light (P. 15-9, 16-36)
• Main wire harness
• Handle cable or remote control cable A
and B