Honda BF40D Mode D'emploi page 752

9) Remove the four 6 x 32 mm flange bolts, two 6 mm flange
nuts and the two 6 x 25 mm bolt/washers. Remove the
intake manifold assembly.
10) Remove the two anode metal caps and remove the O-rings.
Replace the O-rings with the new ones.
b. DISASSEMBLY/REASSEMBLY
• SILENCER/THROTTLE BODY
[2]
CAP
[1]
O-RING
Do not reuse.
[9]
THROTTLE BODY
INSPECTION/CLEANING: P. 5-74
5-92
[3]
IDLE ADJUSTING SCREW
ADJUSTMENT: P. 5-73
[7]
[8]
SILENCER GROMMET
AIR FLOW BAND
REASSEMBLY: P. 5-93
752
[1]
6 x 25 mm
BOLT/WASHER (2)
6 x 32 (4)
[4]
6 mm FLANGE NUT (2)
[4]
IAT SENSOR
[6]
SILENCER
[2]
O-RING (2)
[3]
ANODE METAL
CAP (2)
[5]
SENSOR GROMMET