Honda BF40D Mode D'emploi page 774

14) Remove the screw washer and remove the plate.
15) Remove the insulator from the vapor separator cover.
16) Raise the four retaining tabs of the connector assembly in
the positions shown.
17) Remove the connector assembly from the vapor separator
cover.
18) Remove the O-ring from the connector assembly.
Replace the O-ring with a new one.
5-103
[1]
INSULATOR
[4]
VAPOR SEPARATOR COVER
[1]
CONNECTOR
ASSEMBLY
[2]
CONNECTOR
ASSEMBLY
[1]
VAPOR
SEPARATOR
COVER
774
[2]
SCREW
WASHER
[3]
PLATE
[2]
RETAINING
TAB (4)
[3]
O-RING