Honda BF40D Mode D'emploi page 76

From P. 2-38
Turn the combination switch ON and check
whether the oil indicator light comes ON.
Turn the combination switch OFF.
Short the No.33 terminal (Yellow) of the
ECM connector A main wire harness
9
side 36P connector to the engine ground
using a jumper wire.
Turn the combination switch ON.
ECM CONNECTOR A
MAIN WIRE HARNESS SIDE
9
OPL (Yellow)
VIEWED FROM THE TERMINAL SIDE
Check that the oil indicator light does not
come ON.
Is it normal?
YES
Replace the ECM with a new one and
recheck.
2-39
Check the following:
NO
• Indicator light (P. 15-9, 16-36)
• Main wire harness
• Handle cable or indicator wire
76