Honda BF40D Mode D'emploi page 75

From P. 2-37
Turn the combination switch OFF.
Short the No.19 terminal (Red/Blue) of the
ECM connector A main wire harness
9
side 36P connector to the engine ground
using a jumper wire.
Turn the combination switch ON.
ECM CONNECTOR A
MAIN WIRE HARNESS SIDE
9
WARNL (Red/Blue)
VIEWED FROM THE TERMINAL SIDE
Does the MIL come ON?
YES
Turn the combination switch OFF.
Short the No.34 terminal (Red) of the ECM
connector A main wire harness side
9
36P connector to the engine ground using a
jumper wire.
Turn the combination switch ON.
ECM CONNECTOR A
MAIN WIRE HARNESS SIDE
9
OHL (Red)
VIEWED FROM THE TERMINAL SIDE
Does the overheat indicator light come ON?
YES
Go to P. 2-39
Check the following:
NO
• Indicator light (P. 15-9, 16-36)
• Main wire harness
• Handle cable or remote control cable A
and B
Check the following:
NO
• Indicator light (P. 15-9, 16-36)
• Main wire harness
• Handle cable or indicator wire
75
2-38