Publicité
Les langues disponibles
Les langues disponibles
5.
ADJUSTMENTS AND SERVICING PROCEDURES
5.1
A
DJUSTMENT OF THE CONTINUOUS REGULATING SYSTEM
RV
FR
PG
OS
AR
AV
FN
DP
Fig. 5.1
The working pressure is determined by the tension of the spring in
the regulating valve (RV). This tension can be increased to raise the
pressure and decreased to lower it by turning the adjusting wheel
clockwise and anti-clockwise respectively.
To adjust the normal working pressure, proceed as follows:
1. Start and warm up the engine (see section 3.3).
2. With the outlet valves (AV) closed, pull out the knob, adjust the
regulating valve (RV) until a pressure of 8.5 bar(e) is reached.
3. Check the minimum speed of the engine. Adjust minimum speed
stop screw if necessary.
4. Open an outlet valve (AV) just enough to let the engine (E) run at
maximum speed. The working pressure must be 7 bar(e); adjust if
necessary with regulating valve (RV).
SVa
SV
SL
BDV
CV
OF
FP
SL
OLG
VI
C
UA
UV
VH
CE
TS
DP
5. Check the engine maximum speed. Adjust the maximum speed
by means of adjusting eccentric nut on top of speed regulator
(SR).
6. Close the outlet valves (AV), check that the pressure is between
8.3 and 8.7 bar(e). Lock the regulating valve (RV) by pushing the
knob down.
7. Check the operation of the solenoid valve (SVa).
I
M
NSTRUCTION
ANUAL
AF
VV
E
OC
SR
F
29
Publicité
