Télécharger Imprimer la page

Atlas Copco XAS96 DdG Manuel D'instructions page 25

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 79
4.
MAINTENANCE
4.1
U
SE OF SERVICE PAKS
Service Paks include all genuine parts needed for normal
maintenance of both compressor and engine.
Service Paks minimise downtime and keep your maintenance budget
low.
Order Service Paks at your local Atlas Copco dealer.
Maintenance schedule
Service pak
Engine oil level
Compressor oil level
Air filter vacuator valve
Fuel filter water drain
Air intake vacuum indicator
Electrolyte level and terminals of battery
Tyre pressure
Leaks in air-, oil- or fuel system
Oil cooler package
Engine minimum and maximum speeds
Torque of wheel nuts
Brake system (if installed)
Safety valve
Door Hinges
Towing eye shaft or ball coupling
and its shaft
Shut-down switches
Pressure drop over separator element (2)
Fan v-belt (3)
Fuel tank
Compressor oil
Compressor oil filter
Air filter element (1)
Engine oil (3) (4) (6)
Engine oil filter (3)
Fuel filter (3)
Engine inlet and outlet valves (3)
Inspection by Atlas Copco
Service technician
(1) More frequently when operating in a dusty environment.
(2) Replace the element when the pressure drop exceeds 0.8 bar.
(3) Refer to the Deutz operation manual.
(4) 500 hours only valid when using PAROIL SAE 15 W 40.
Keep the bolts of the housing, the lifting eye, the towbar and the axle securely tightened.
Refer to ÔTechnical specificationsÕ for the torque values.
Daily
Initially
around 50 hours
supplied with unit
Check
Check
Empty
Drain
Check
Check
Check
Check
Check
Check
Check/Adjust
Adjust
Replace
Change
Replace
Replace
(5) The valves need to be adjusted for the first time before 500 running hours.
(6) Also drain engine oil from engine oil cooler
4.2
P
REVENTIVE MAINTENANCE SCHEDULE FOR THE
COMPRESSOR
The schedule contains a summary of the maintenance instructions.
Read the respective section before taking maintenance measures.
When servicing, replace all disengaged packings, e.g. gaskets,
O-rings, washers.
For engine maintenance refer to Engine Operation Manual.
The maintenance schedule has to be seen as a guideline for units
operating in a duty environment typical to compressor applications.
Maintenance schedule can be adapted depending on application
environment and quality of maintenance.
Normal
or every 500 hours
or every 1000 hours
2912 4199 02
Check
Check
Check
Clean
Check
Check
Check/Adjust
Grease
Grease
Measure
Adjust
Clean
Change
Replace
Replace
The rocker cover gasket is not included in the 500 hours kit.
They are to be ordered separately:
(see Fig. 2.2; DPec = Drain plug engine oil cooler)
I
M
NSTRUCTION
Yearly
Remarks
2912 4275 06
Check
Check
Check
Clean
Check
Check
Check/Adjust
Test
Grease
Grease
Check
Replace
Adjust
Clean
Change
Replace
Replace
Change
Replace
Replace
Adjust
first adjustment (5)
for 3 cyl. : PN 2914 8054 00
ANUAL
25

Publicité

loading

Ce manuel est également adapté pour:

Xas96 ddg it