Table des Matières
Publicité
INSP
ADJ
Å
TOP COWLING/FUEL SYSTEM
3030
ı
3040
(4) Check the top cowling fitting and
repeat the adjustment if necessary.
NOTE:
• Moving the latch towards the seal will
loosen the top cowling.
• Moving the latch away from the seal will
tighten the top cowling.
FUEL SYSTEM
INSPECTING THE FUEL LINE
1. Inspect:
• Plastic locking tie
Loosen → Retighten or replace.
2. Inspect:
• Fuel line
Cracks/damage/leaks → Replace.
Refer to "FUEL FILTER" on page 4-1.
Refer to "FUEL PUMP" on page 4-10.
INSPECTING THE FUEL FILTER
Inspect:
• Fuel filter element
• Fuel filter cup
Clogs/cracks/leaks → Replace.
Foreign matter → Clean.
Refer to "FUEL FILTER" on page 4-1.
Å Oil injection models
ı Pre-mixed models
3-3
E
3
3
3
Publicité
Table des Matières
