Table des Matières
Publicité
POWR
CONTROL UNIT
5165
5166
5167
INSTALLING THE CONTROL UNIT
1. Install:
• Bushing 1
• Spring 2
NOTE:
Mesh the spring hook with the slit in the
accelerator control lever.
2. Install:
• Throttle lever 1
NOTE:
• Mesh the throttle lever hook with the
spring hook.
• Turn the throttle lever clockwise and hook
the projection a on the throttle lever with
the notch b in the accelerator control
lever.
3. Adjust:
• Ignition timing
Refer to "CONTROL SYSTEM" on
page 3-4.
5-31
E
5
Publicité
Table des Matières
