Table des Matières
Publicité
BRKT
RESERVOIR AND POWER TRIM AND TILT MOTOR
WARNING
• To prevent the hydraulic fluid from spurt-
ing out due to internal pressure, the out-
board should be kept fully tilted up (the
tilt rod at full length).
• After removing the power trim and tilt
motor or reservoir, do not push the tilt
ram down. This may cause hydraulic fluid
to spurt out from the port.
CAUTION:
Do not wipe hydraulic system components
with rags, paper, tissues, or the like, as
fibers from such material will cause mal-
functions if they enter the system.
INSPECTING THE RESERVOIR
1. Drain:
• Power trim and tilt fluid
2. Inspect:
• Reservoir
Cracks/damage/leaks → Replace.
INSPECTING THE GEAR PUMP
HOUSING FILTER
Inspect:
• Gear pump housing filter
Damage/tears → Replace.
Foreign matter → Clean.
7-39
E
Publicité
Table des Matières
