Table des Matières
Publicité
–
+
ELEC
POWER TRIM AND TILT MOTOR
8850
8860
8870
8880
8890
2. Inspect:
• Brush continuity
No continuity → Replace.
CAUTION:
Do not touch the bimetal a; touching it
may affect the operation of the breaker.
INSPECTING THE ARMATURE
1. Measure:
• Commutator diameter a
Out of specification → Replace.
Commutator diameter limit
21.0 mm (0.83 in)
2. Measure:
• Commutator undercut a
Out of specification → Replace the
armature.
Commutator undercut limit
0.85 mm (0.03 in)
3. Inspect:
• Armature continuity
Out of specification → Replace.
Armature continuity
Commutator segments
Segment-laminations
Segment-shaft
8-40
E
8
Continuity
No continuity
No continuity
Publicité
Table des Matières
