Table des Matières
Publicité
INSP
ADJ
OIL INJECTION SYSTEM
3180
AIR BLEEDING THE OIL INJECTION
SYSTEM
Bleed:
• Air bubbles
(from the oil injection system)
Bleeding steps
(1) Fill the fuel tank with the fuel/oil mix-
ture (50:1).
Recommended fuel
Fuel type
Unleaded regular gasoline
Fuel rating
PON: 86
RON: 91
Recommended engine oil
Engine oil type
2-stroke outboard engine oil
Engine oil grade
TC-W3
CAUTION:
Only use the fuel/oil mixture (50:1) or
engine malfunctions or seizure may result.
(2) Disconnect the oil pump link rod joint
from the oil pump lever.
(3) Start the engine.
(4) Turn the oil pump lever 1 and keep it in
the fully-opened position until the fuel/
oil mixture flows out of the oil pump
feed hoses.
3-15
E
3
Publicité
Table des Matières
