YAMAHA Marine 100A Manuel D'entretien page 86

INSP
ADJ
TOP COWLING
3001
3002
3003
3010
3020
TOP COWLING
INSPECTING THE LOCK RELEASE
(OIL INJECTION MODELS)
1. Inspect:
• Lock release
Dull release → Adjust the release wire.
2. Adjust:
• Release wire length
Adjustment steps
(1) Push each locking plate down until it
locks.
(2) Loosen the locknuts 1.
(3) Turn the adjusting nuts 2 until the
ends of both wires 3 touch the locking
plates 4.
(4) Secure the locknuts 1.
INSPECTING THE TOP COWLING FIT
1. Inspect:
• Top cowling fitting
Loose/unlatched → Adjust the top
cowling hook.
2. Adjust:
• Top cowling hook position
Adjustment steps
(1) Loosen the bolts 1 approximately 1/4
of a turn.
(2) Move the top cowling hook either up
or down slightly.
(3) Secure the bolts.
3-2
E
3
3
3