Publicité
18. Déclarations et certificats (original en
anglais)
EU Declaration of Incorporation (DOI) (in accordance with 2006/42/EC Annex II B) original EN
Manufacturer
Person in the Community
Authorized to Compile the
Technical File
Description and Identification of the Partially-Completed Machine(s)
Product and Function:
Model:
Note: This Declaration of Incorporation is NOT applicable when the UR OEM Controller is used.
Serial Number:
Incorporation:
It is declared that the above products fulfil, for what is supplied, the following directives as detailed below: When this incomplete
machine is integrated and becomes a complete machine, the integrator is responsible for determining that completed machine
fulfils all applicable Directives and providing the Declaration of Conformity.
I. Machinery Directive
2006/42/EC
II. Low-voltage Directive
2014/35/EU
III. EMC Directive 2014/30/EU
Reference to the harmonized standards used, as referred to in Article 7(2) of the MD & LV Directives and
Article 6 of the EMC Directive:
UR30
Universal Robots A/S
Energivej 51,
DK-5260 Odense S Denmark
David Brandt
Technology Officer, R&D
Universal Robots A/S, Energivej 25, DK-5260 Odense S
Industrial robot multi-purpose multi-axis manipulator with control box &
with or without teach pendant Function is determined by the completed
machine (robot application or cell with end-effector, intended use and
application program).
UR3e, UR5e, UR10e, UR16e (e-Series): Below cited certifications and
this declaration include:
•
Effective October 2020: Teach Pendants with 3-Position Enabling (3PE TP) &
standard Teach Pendants (TP).
•
Effective May 2021: UR10e specification improvement to 12.5kg maximum
payload.
Starting 20235000000 and higher
year
3=UR3e, 5=UR5e, 3=UR3e, 0=UR10e (10kg), 2=UR10e(12.5),
e-Series
6=UR16e
sequential numbering, restarting at 0 each year
Universal Robots e-Series (UR3e, UR5e, UR10e and UR16e) shall only
be put into service upon being integrated into a final complete machine
(robot application or cell), which conforms with the provisions of the
Machinery Directive and other applicable Directives.
The following essential requirements have been fulfilled:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.4.3, 1.2.5, 1.2.6, 1.3.2, 1.3.4, 1.3.8.1, 1.3.9, 1.5.1, 1.5.2,
1.5.5, 1.5.6, 1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3, 4.1.3 Annex VI.
It is declared that the relevant technical documentation has been
compiled in accordance with Part B of Annex VII of the Machinery
Directive.
Reference the LVD and the harmonized standards used below.
Reference the EMC Directive and the harmonized standards used below.
235
18. Déclarations et certificats (original en anglais)
User Manual
Publicité
