Replacing Samples - Steinberg HALION4 Mode D'emploi

Setting Up General Export Options
In the Export Options section, you can make general settings for the export. The
following settings are available:
Option
Trim Samples
Use Exported
Samples
Avoid Duplicate
Audio Files
If a sample has several zones and these zones have different loop settings, HALion
creates duplicates of the file.

Replacing Samples

The Replace Samples function allows you to exchange the sample that is used to play
back one or multiple zones. The zone-specific settings like Pitch, Filter, or Amplifier
are not modified by this.
Replacing a Single Sample
1. In the Program Tree or Mapping editor, select the zone for which you want to
replace the sample.
2. On the context menu for the zone, open the submenu "Import/Export", and select
"Replace Sample".
A file dialog opens.
3. Locate and select the new sample and click OK.
Replacing Multiple Samples
1. In the Program Tree or Mapping editor, select the zones for which you want to
replace the samples.
2. On the context menu for one of the zones, open the Import/Export submenu, and
select "Replace Samples".
3. At the bottom of the file dialog, select the method for replacing samples that you
want to use.
Description
Trims the samples to their actual length, specified with the Sample
Start and Sample End parameters of the zone.
Updates the sample references of the zones to use the exported
samples.
Prevents samples that are used by several zones from being
exported as duplicate audio files.
75
Importing and Exporting Samples
Replacing Samples