The Trigger Pads - Steinberg HALION4 Mode D'emploi

Échantillonneur vst et système de création sonore
Table des Matières

Publicité

The Trigger Pads

You can use the trigger pads to trigger single notes or whole chords and to switch
between FlexPhraser variations. Many of the programs that come with HALion make
use of the trigger pads:
• Blue pads have single notes or whole chords assigned.
• The line above the pad turns orange when the pad switches between FlexPhraser
variations.
• To trigger a pad with your mouse, click the corresponding pad.
Assigning Trigger Notes to Pads
You can assign a MIDI note to a pad and trigger the pad by playing this note.
To define the note, you have the following options:
• Right-click a pad, open the "Assign Trigger Note" submenu, and from the further
submenus, select the octave, and note that you want to assign.
• Open the context menu for a pad, select "Learn Trigger Note", and play the note
on your MIDI keyboard (or click a key on the internal keyboard).
The name of the assigned trigger note is displayed in the top left corner of the pad.
On the internal keyboard, keys that serve as trigger notes are shown in blue. These
keys do not play sounds, but trigger the corresponding pads instead.
• To remove a trigger note from a pad, right-click the pad and select "Forget Trigger
Note".
Using Default Trigger Note Settings
By default, the assigned trigger notes are stored with each program to allow for
maximum flexibility. However, you may want to keep a fixed set of trigger notes to
reflect an existing hardware setup.
To be able to use default trigger note settings, you have to save them first:
• To specify a global set of trigger notes, set the trigger notes for all pads, right-click
a pad, and from the context menu, select "Save Trigger Notes as Default".
Now you can activate the "Use Default Trigger Notes" option:
• Right-click a pad and select "Use Default Trigger Notes".
Changing programs or multi-programs does not change the trigger notes
anymore.
When you deactivate this option, the last set of trigger notes remains active. To return
to the trigger notes that were saved with the program, reload the program.
Naming a Pad
To indicate the functionality of a pad, you can enter a name. Proceed as follows:
1. Right-click the pad, and on the context menu, select "Rename Pad".
2. Enter the name.
3. Press [Enter] to confirm the name.
197
MIDI Modules Reference
The Trigger Pads

Publicité

Table des Matières
loading

Table des Matières