Key Switch Alternate - Steinberg HALION4 Mode D'emploi

Key Switch Alternate

Use this module to switch automatically between different layers that are using
MegaTrig key switches to define whether they are played or not.
To alternate the playback between different key switches, proceed as follows:
1. Insert the Key Switch Alternate module above the layers that contain the MegaTrig
modules with key switch settings.
2. Open the module editor and drag and drop the key switches from the Available
Key Switches list to the Alternation List in the order you want them to alternate.
You can rearrange the order of the list using drag and drop.
3. Select the Alternation Mode and start playback.
This MIDI module is provided for compatibility with HALion 3 programs, because in
HALion 3, the alternation of layers was realized using key switches. When using
HALion 4, no additional MegaTrig modules with key switch settings are necessary.
Instead of using Key Switch Alternate, you can use the Layer Alternate module.
Available Key Switches
This list shows the currently available key switches that can be used to control an
alternation. To create new alternations, drag a key switch from this list to the
Alternation list. Note however, that there is no direct relation between the Available
Key Switch list and the Alternation list and once created, an alternation can be
renamed and assigned a note.
Alternation List
To alternate key switches, drag and drop them from the list of available key switches
to this list. Depending on the selected alternation mode, the triggered key switches
alternate in the order they are listed or randomly. You can change the order of the
listed key switches by dragging them to another position. The key switch that is
currently triggered is highlighted. To remove a key switch from the Alternation list, use
the context menu for the selected key switch.
To trigger a specific key switch, turn off the Enable button to stop any automatic
alternation and select the key switch in the Alternation list.
Adding New Alternations
Normally you add alternations by dragging existing key switches from the Available
Key Switches list. However, it is also possible to create new alternations from scratch.
Proceed as follows:
1. Click the "+" button above the Alternation list.
2. An new alternation is added to the list.
3. Specify the name of the alternation.
4. Specify the key switch note to be sent.
209
MIDI Modules Reference
Key Switch Alternate