Table des Matières
Publicité
A blue line at the top of the surround field indicates the distance up to which a
phantom signal is added. If you position the source signal inside this range, the signal
is sent to all three channels.
Channel Router
This effect allows you to change the channel routing of the bus to adapt the channel
format to different multi-channel samples. Each of the six input channels can be
routed to a specific output channel.
Downmix
This effect allows you to downmix a surround signal to a stereo signal.
There are no controls on the editor of this effect, because the downmix is done
automatically.
HALion 3 Legacy Effects
In addition to the standard HALion effects, a number of effects from HALion 3 is also
provided. These effects can be selected from the Legacy submenu of the Effects
menu.
Hall Reverb
A simple reverb with adjustable pre-delay and damping.
Parameter
Predelay
Time
HF Damp
Lo EQ
Hi EQ
Mix
Non-Linear Reverb
A "gated" reverb with a sharp cutoff.
Parameter
Time
HF Damp
Lo EQ
Hi EQ
Mix
Description
The Predelay time delays the wet signal to simulate larger
acoustic spaces or as a slap-back effect.
Length of reverb tail.
Progressive damping of high frequencies.
Low-cut EQ.
High-cut EQ.
Wet/dry mix.
Description
Length of reverb tail. It also allows you to change the sound
from dense early reflections to a trashy, grainy 80's-type reverb.
Progressive damping of high frequencies.
Low-cut EQ.
High-cut EQ.
Wet/dry mix.
184
Effects Reference
HALion 3 Legacy Effects
Publicité
Chapitres
Table des Matières
