The Toolbar - Steinberg HALION4 Mode D'emploi

The Toolbar

The toolbar is situated below the plug-in functions section. On the left, controls for
loading multi-programs are located, see
these you find two buttons for managing screen sets, see
The right section of the toolbar contains various buttons with useful global functions.
Missing
Busses
Find Missing
Missing Busses
If one or more bus connections could not be established, this button allows you to
open the Pending Busses dialog. Here you can select alternative busses to be used
instead, see
Find Missing Samples
If you load a program that cannot find all samples that it uses, the "Find Missing
Samples" dialog opens, see
dialog without resolving all missing samples, this button becomes available. It allows
you to open the "Find Missing Samples" dialog after you have loaded a program.
Global Insert Effects/AUX Effects/FlexPhrasers
Use these buttons to switch off all insert effects, all AUX effects, or all FlexPhrasers for
the plug-in at once. You can use this feature to compare sounds with and without
effects, for example.
RAM Save Mode
The RAM Save function can be helpful for optimizing the performance of your system. It
scans the playback of your project and unloads unused samples. Proceed as follows:
1. Click the RAM Save button.
2. In the dialog, click Yes to start collecting the necessary samples.
The RAM Save button starts blinking.
3. Play back the project in your host application from the beginning to the end or to
the point where no new notes are played.
4. Click the RAM Save button again.
A dialog opens asking if you want to unload all unused samples.
5. Click Yes to unload the unused samples.
If you click Yes, the button lights up, to indicate that RAM Save mode is active.
• To deactivate RAM Save and reload the unused samples, click the RAM Save
button again.
Insert Effects/
AUX Effects/ Enable MIDI Mapping
FlexPhrasers Selection Options
RAM Save
Samples
"Automatic Output Connection"
"Finding Missing Samples"
45
Global Functions and Settings
"Managing Multis" on page
"Screen Sets"
MIDI Undo/Redo
Reset
on page 161.
on page
The Toolbar
21. To the right of
on page 14.
70. If you close this