Steinberg HALION4 Mode D'emploi page 36

Renaming Entries
When you create a new element in the Program Tree, it automatically gets a generic
name. You can change this name in the following ways:
• Select an entry, click it a second time, and enter the new name.
• Select an entry, press [F2] (Win) or [Return] (Mac), and enter the new name.
Drag and Drop
Select the program or any number of layers and zones and drag the selection to a
layer to move the selection inside this layer.
Using Cut, Copy, and Paste
• To cut the selected elements, use the Cut icon on the toolbar, the Cut command
on the context menu, or the key command [Ctrl]/[Command]-[X].
• To copy the selected elements, use the Copy icon on the toolbar, the Copy
command on the context menu, or the key command [Ctrl]/[Command]-[C].
• To insert the copied data, use the Paste icon on the toolbar, the Paste command
on the context menu, or the key command [Ctrl]/[Command]-[V].
You can also copy or move the selection from one program to another. Furthermore, it
is possible to move a complete program into another one. In this case the moved
program becomes a layer inside the target program.
Paste to New Layer
To paste copied zones to a new layer, open the context menu for a zone, layer or
program (depending on where you want to insert the new layer), and select "Paste to
new Layer".
Copying and Pasting Zone Settings
1. Right-click the zone that contains the settings that you want to copy, and select
"Copy Zone Settings" from the context menu.
2. Right-click one of the selected zones, and select "Paste Zone Settings" from the
context menu.
Transfer Settings to Mapping
Zones often have varying Fine Tune and Level settings, while other settings stay the
same across all zones. To avoid varying Fine Tune and Level settings in the zones, you
can transfer these settings to the Tune and Gain parameter of the mapping.
1. Right-click the program or the layers and zones.
2. Open the "Transfer Settings to Mapping" submenu and specify which settings to
transfer: "Select All" to transfer Fine Tune and Level at the same time or select
"Fine Tune" or "Level" to transfer them individually.
• The corresponding zone settings are transferred to the mapping and reset to their
default afterwards.
36
Using the Program Tree
Editing Zones, Programs, and Layers