Modulation Effects
Drum Mic Angle
This adjusts the stereo spread of the drum microphones. At a setting of 0° the sound
image is monophonic. At a setting of 180° the sound image is fully stereo.
Treble
Use this to adjust the tone color of the high frequencies.
Drive
Here you can adjust the distortion of the amplifier.
Bass
Use this to adjust the tone color of the low frequencies.
Gain
Use this to set the output level of the rotary speaker.
Vibrato
The Vibrato effect emulates the chorus and vibrato effects of vintage organs. It
thickens the sound by means of pitch modulation. The effect provides direct access to
the classic chorus and vibrato settings (C1, C2 and C3 and V1, V2 and V3). In
addition, there is a Custom mode that allows you to adjust the amount of chorus or
vibrato freely.
Type
Here you can select the classic chorus and vibrato settings C1, C2 and C3 and V1,
V2 and V3. The control is only available if the effect is set to Classic mode.
Custom Mode
Activate this to adjust the chorus and vibrato settings freely with the Rate, Depth, and
Vibrato/Chorus controls.
Rate
Use this to specify the frequency of the pitch modulation in Hertz (Hz).
Depth
This sets the intensity of the pitch modulation.
Vibr/Chor
This controls the mix between the vibrato and the chorus signal. At a setting of 100 %
you only hear the chorus effect.
177
Effects Reference