Steinberg HALION4 Mode D'emploi page 52

Smoothing
MIDI controllers have a maximum resolution of 128 steps. This is rather low. When
you use a MIDI controller as a modulation source in the modulation matrix or to
remote-control a quick control, the parameter does not change smoothly, which can
produce an effect often referred to as "zipper noise". To avoid this, HALion offers MIDI
controller smoothing.
• Turn the control to the left to increase controller smoothing.
Parameter changes triggered by MIDI controllers are less immediate.
• Turn the control to the right to decrease controller smoothing.
This way, parameters respond faster to MIDI controllers.
Velocity Note-On to Note-Off
Some keyboards do not transmit note-off velocity messages. If this option is activated,
the played note-on velocity value is also used as note-off velocity for the notes.
FlexPhraser Hold Reset
Sends a global Hold Reset message to all FlexPhraser modules that are used in
HALion.
The Reset Controller pop-up menu allows you to assign a dedicated MIDI controller
to the FlexPhraser Hold Reset button for remote-controlling it.
Performance Meter Section
The Performance Meter section provides a variety of performance relevant information.
Each meter displays the current value, the peak value, and a curve showing the changes
over time. To reset all peaks, click the reset button (the lightning icon) in the title bar of
the section. The following values are displayed:
Option
Voices
Streamed MB/s
CPU Avg Load
CPU Peak Load
Dropout/s
Preload Memory
Description
The number of played voices.
The quantity of sample data that is streamed from the hard
disk.
The average CPU load.
The CPU peak load.
The number of dropouts per second. (This can be an indicator
for hard disks that are too slow.)
The quantity of samples loaded into the RAM of your
computer.
52
Global Functions and Settings
The Options Editor