Distortion
This effect offers the whole range of distortion, from low fidelity, digital distortion to
high fidelity, analog sounding distortion. The four available types of distortion (Rate
Red, Tube Drive, Hard Clip, and Bit Red) can be freely combined.
In Gain
This adjusts the input level of the sound.
Rate Red (Rate Reduction)
Rate reduction distorts the sound by means of aliasing. Enable the Rate Red option to
activate the Rate Red control that adjusts the amount of aliasing. The lower the
setting, the more aliasing is added.
Tube Drive
This adds warm, tube-like distortions to the sound. Enable the Tube Drive option to
activate the Tube Drive control that adjusts the amount of distortion. The higher the
setting, the more distortion is added.
Hard Clip
This adds bright, transistor-like distortions to the sound. Enable the Hard Clip option
to activate the Hard Clip control that adjusts the amount of distortion. The higher the
setting, the more distortion is added.
Bit Red (Bit Reduction)
Bit reduction distorts the sound by means of quantization noise. Enable the Bit Red
option to activate the Bit Red control that adjusts the amount of quantization noise.
The lower the setting, the more quantization noise is added.
Out Gain
This adjusts the output level of the sound.
Mix
This controls the mix between the dry and the wet signal.
Modulation Effects
Chorus
The Chorus effect thickens and broadens the sound by means of pitch modulation.
Rate
Use this to specify the frequency of the pitch modulation in Hertz (Hz).
Sync
Activate this to set the Rate value in fractions of beats.
173
Effects Reference
Modulation Effects