Steinberg HALION4 Mode D'emploi page 67

Only values between 0 and 127 can be extracted as MIDI note numbers for any of the
parameters described in the following sections (e. g. "Number from Sample"). The
smaller value is used as the lower limit and the higher number as the upper limit (e. g.
"Sample_Name_76-121").
Setting the Key Range
On the Key Range pop-up menu, the following options are available:
Option
From Sample File
Text from Sample Name
Number from Sample
Name
From Sample Name
Pattern
Root Key Only
Root Key Fill Centered
Root Key Fill Up
Root Key Fill Down
Chromatic
White Keys
Black Keys
Fixed
The Chromatic, White Keys and Black Keys options alter the root key. All other
options map the root key according to the settings you make on the Root Key menu.
Description
The samples are mapped to the key range that is saved in the
file header of the sample. If this does not contain any key
range information, the settings for Start and End Key are
used instead.
The samples are mapped to the key range that is extracted
from the name of the sample. This function searches for a key
range that is defined in text form, for example
"Sample_Name_B2-C#3".
As above, but instead of searching for text information, this
function searches for MIDI note numbers, for example
"Sample_Name_59-61".
The samples are mapped to the key range that is extracted
from the name of the sample according to the name pattern
you set.
Each sample is mapped to its root key only.
The samples are mapped to their root key. The zones expand
to the left and right from the root key to fill empty spaces.
The samples are mapped to their root key. The zones expand
from the root key upwards to fill empty spaces.
The samples are mapped to their root key. The zones expand
from the root key downwards to fill empty spaces.
The samples are mapped chromatically to the white and
black keys in ascending order, starting at the key specified
with the Start value. The root key is set accordingly.
The samples are mapped to white keys in ascending order,
starting at the key you set with the Start Key parameter. The
root keys are set accordingly.
The samples are mapped to black keys in ascending order,
starting at the key you specify with the Start Key parameter.
The root keys are set accordingly.
The samples are mapped to the key range that you specify
with the Start and End Key parameters.
67
Importing and Exporting Samples
Importing Samples