Distortion Effects - Steinberg HALION4 Mode D'emploi

Distortion Effects

Amplifier
This effect emulates the sound of an amplifier with speakers. There are different
amplifiers and speaker models you can combine.
Amp Model
Here you select the type of amplifier. The sound character of the overdrive changes
with the amplifier you select. To bypass the amplifier, select No Amp.
Speaker Model
Here you select the type of speaker model. Each model colors the sound uniquely. To
bypass the model, select "No Speaker".
Drive
This adjusts the amount of overdrive.
Bass
This adjusts the tone color of the low frequencies.
Middle
This adjusts the tone color of the mid frequencies.
Treble
This adjusts the tone color of the high frequencies.
Presence
This adds brightness.
Low Damp
Attenuates the low frequencies of the speakers.
High Damp
Attenuates the high frequencies of the speakers.
Channel Mode
Here you can define which output channels of the amplifier deliver a distorted signal.
You can set it to L (Left), R (Right) or L/R (Both). When set to L or R, the other
channel provides a clean signal.
Output
This controls the output level of the amplifier.
172
Effects Reference
Distortion Effects