Assigning Midi Controllers; Assigning Midi Controllers To Aux Fx; Saving A Midi Controller Mapping As Default - Steinberg HALION4 Mode D'emploi

By default, some of the most common parameters like slot volume, pan, as well as the
quick controls of each slot are already pre-assigned. The slot AUX FX send modules
1-4 are also pre-assigned and become directly controllable as soon as you load one
of the AUX FX send modules on a slot insert effect.
You can customize the factory MIDI controller mapping by assigning your own MIDI
controllers using the Learn function.

Assigning MIDI Controllers

1. Right-click the control you want to remote-control.
2. Select "Learn CC" from the menu.
3. On your MIDI keyboard or controller, use the knob, fader, or button.
The next time you right-click the control, the menu shows the assigned MIDI
controller.
You can assign the same MIDI controller several times to different parameters.
However, you cannot assign different MIDI controllers to the same parameter.
• To remove a MIDI controller assignment, right-click the corresponding control, and
select "Forget CC".
Setting the Parameter Range
You can set the minimum and maximum values for the parameter separately for each
assignment.
• To set the minimum value for the parameter, set the value, right-click the control,
and select "Set Minimum".
• To set the maximum value for the parameter, set the value, right-click the control,
and select "Set Maximum".

Assigning MIDI Controllers to AUX FX

You can assign the parameters of the AUX FX to MIDI controllers as well. Unlike the
slots, the AUX FX do not have a MIDI port and channel of their own. Instead, when
learning, they listen to any incoming MIDI controller message, regardless of the MIDI
channel. When they are assigned, they keep the specified MIDI channel.
• To assign a MIDI controller, load the effect, right-click the parameter, and assign
the controller as described above.
• If you unload or replace the effect, the MIDI controller assignment of this effect is
lost.

Saving a MIDI Controller Mapping as Default

After customizing the factory MIDI controller assignments, you can save them as
default.
• Open the Options editor and click "Save as Default" in the MIDI controller section.
Now, each time you load a new instance of the plug-in, your customized MIDI
controller mapping is available as default.
"Save as Default" does not include any of the MIDI controller assignments of the AUX
FX.
The current MIDI controller mapping is also saved with each project. This way, you
can transfer your settings to other systems. The project also includes the MIDI
controller assignments of the AUX FX.
157
MIDI Editing and Controllers
Assigning MIDI Controllers