Steinberg HALION4 Mode D'emploi page 196

Play Range
You can use the Play Range parameters to determine which keys and velocities
trigger the phrase playback.
Low Key
This defines the lowest key that triggers the phrase.
High Key
This defines the highest key that triggers the phrase.
Low Vel
This defines the lowest velocity that triggers the phrase.
High Vel
This defines the highest velocity that triggers the phrase.
Working with FlexPhraser Variations
For each FlexPhraser module that you add, you can set up up to 8 different variations
of phrases. You can switch between them with the variation buttons at the top right of
the FlexPhraser. You can also remote-control the Variation buttons using HALion's
trigger pads. This also gives you the possibility to switch between variations by
playing the trigger keys assigned to the trigger pads.
To avoid that the variation switches in the middle of a beat or measure, use the trigger
modes "Next Beat" or "Next Measure".
Creating Variations
You can create variations either by starting from scratch or by copying an existing one.
To start from scratch, proceed as follows:
1. Click one of the 8 variation buttons at the top right of the FlexPhraser.
2. Assign a phrase and edit the FlexPhraser settings.
The variation is saved and can be recalled by clicking the Variation button.
To copy an existing variation, proceed as follows:
1. Right-click the variation button for the variation that you want to copy and select
"Copy FlexPhraser Variation".
2. Right-click the variation button to which you want to paste the variation and select
"Paste FlexPhraser Variation".
The parameters Loop, Sync, Hold, Trigger Mode, Restart Mode, Key Mode, Vel Mode,
Low/High Key, and Low/High Vel are not part of the variations. You set them up only
once for each inserted FlexPhraser module.
Switching Variations with the Trigger Pads
You can switch between variations using the trigger pads (see
FlexPhraser Variations" on page 198).
196
MIDI Modules Reference
The FlexPhraser
"Switching between